db7631960003143f5670c7f1c2cf76a9758fe17a
8
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 ReaperOfVeriod
|
65b5d366de |
Implement the PS2 float model and the LightTfrags pass
Two pieces, and the first is the reason the second can be trusted. ps2.rs is the EE's FPU on raw u32 bit patterns. It is not f32: there are no denormals (exponent 0 *is* zero), no NaN and no infinity (exponent 255 is an ordinary value, so MAX reads back in Rust as NaN -- a test asserts exactly that, because it is the sharpest available statement of why this module exists), every result truncates toward zero, the adder discards the small operand's bits more than one below the large one's LSB and returns the large operand unchanged across a 25-bit exponent gap, and rsqrt is sqrt-then-divide with truncation between the steps rather than one rounded operation. The lighting pass accumulates all of these across every vertex of every patch, so this is a visible difference rather than a rounding curiosity. tfrag_light.rs is the pass itself: PEXT5 base colour, the select word picking one light set or blending two by bits 8..15 / 256, blended directions re-normalised where unblended ones are not, and base + A.rgb*max(dA, dA*wA) + B.rgb*max(dB, dB*wB). Lighting indexes positions, not vertex-info entries, since a common entry and a LOD entry can share a position. TfragLight gains a `select` field for the u16 at +6. It was briefly reconstructed with an unsafe pointer cast over the struct, which is exactly the sort of thing that breaks silently the moment a field is reordered; it is now a plainly parsed field. The pass does not run yet. The light bank framing the reference uses -- a u32 offset at +0x04, an i32 count there -- gives offset 0xa0d and a count of 698810368 on RAC2 level 0, so RAC2's gameplay extent is not laid out that way. The renderer now counts the vertices it actually lit and prints it, because falling back silently to the stored colours produces a plausible but wrong picture: lighting: 0 of 80274 vertices shaded by LightTfrags; the rest fall back to the tfrag's stored colours (no usable light bank) That line is the current honest state, and the frame has not changed as a result. Where RAC2 keeps its light bank is the open question. |
||
|
ReaperOfVeriod
|
90f02890f8 |
Decode tfrag normals from the overlay's sine table
Normals are per-vertex, and the tfrag's light records store them as an azimuth and elevation *index* into a 256-entry sine table rather than as angles. This decodes that table and builds normals for the renderer. The reference reads the table from an ELF at BOOT_NORMAL_TABLE_VADDR (0x165500) and notes every level overlay carries a copy. The overlay has no ELF header -- it is a raw loadable image starting with code -- so there is no program header to map a virtual address through, and the offset is not fixed either: level 0 has the table at 0xb650c, level 5 at 0xcca30, level 26 at 0xb6284. So it is located by content. Every table starts with exactly (1.0, 0.0), angle zero, and the scan then requires all 256 entries to match cos(i*pi/128), sin(i*pi/128). Validating the whole curve is what makes the search safe: a lone (1.0, 0.0) pair of floats occurs by accident in a 2.7 MB executable, and a test plants one as a decoy. The values are read from the disc rather than recomputed, since those are the numbers the game indexes. A normal is (cos(az)cos(el), sin(az)cos(el), sin(el)) *negated* -- the stored normals point into the surface -- and then given the same Z-up to Y-up swap as positions, or the lighting comes out sideways. The azimuth and elevation fields are stored signed but index 0..=255, so entry 200 must be read as 200, not as -56; there is a test for that. Also frames and parses the level light bank from the gameplay extent, and the pipeline now writes overlay.bin. The per-vertex lighting evaluation is not written yet, so the renderer stays unlit by default. GC_ENGINE_LIT=1 substitutes a host directional light for inspection -- that is a stand-in, not the game's lighting, and it is deliberately not the default. The hash table is regenerated for the 27 new overlay.bin files: now 5,213 files and 5,762,497,559 bytes. |
||
|
ReaperOfVeriod
|
192dcde247 |
Render a level: first drawable frame, and the origin bug it exposed
Adds gc-engine's binary and a level.rs that joins the format layer to the renderer: LOD selection and morphing per patch, then triangles grouped by texture so each texture is one draw rather than one per triangle. The PS2 world is Z-up at 1024 raw units per world unit, so the conversion is (x, y, z) -> (x, z, -y). The sign flip on the third axis turns the PS2's right-handed frame into Bevy's left-handed one rather than negating a determinant, which is what stops the level rendering mirrored. Morphing and collapse are kept distinct. Morphing blends a vertex toward the midpoint of its two parents across its tier's band; collapse replaces the vertex outright, position and UV, once it is past the far edge. Morphing is a blend, collapse is a cut, and conflating them makes distant terrain shimmer. Blending has to happen in raw units before the axis swap: mixing a converted parent with an unconverted child scales the blend by 1024. Level 0 renders as 26,758 textured triangles over 92 textures, correct UVs, with LOD selection live (26 patches at LOD 0, 650 at LOD 2 from the start camera). GC_ENGINE_SHOT writes one frame as a PPM and exits. Rendering immediately exposed a bug no test could. Positions are i16 offsets from a per-patch origin, and the obvious rule -- the last non-index STROW row -- is wrong on RAC2, which also uses STROW for per-vertex light records that come *after* the origin. Taking the last one yields [186, 186, 186, 186] and collapses the whole level onto the world origin. The entire level then fit in a 63-unit box and every test still passed: vert_count matched, tri_count matched, every parent and triangle index resolved, because all of those are relative to the same broken origin. Only a screenshot showed it. The rule that works is the STROW immediately preceding the first V3_16 position unpack; with it, level 0 spans x 86..444, y 46..211, z -477..40, matching the patch bounding spheres. That is worth more than the renderer: a parser can be completely self-consistent and still describe the wrong thing, and where a value is absolute rather than relative it has to be checked against something independent. The frame is flat and dark because there are no normals and no lighting yet. That is the next task -- the per-vertex light records -- not something to paper over with an exposure fudge. |
||
|
ReaperOfVeriod
|
71a3185fa5 |
Resolve tfrag LOD parent linkage: guard absent tiers by their counts
The four V4_8 parent arrays are classified by VU address, but the addresses collide: on level 0 patch 1, unk_indices_2_lod_01_addr == parent_indices_lod_0_addr == 291, and unk_indices_2_lod_0_addr == indices_addr == 294. Matching on address alone cannot separate them, and it fails silently -- the arrays still parse, they just hold the wrong numbers. Two corrections, and the first one is worth recording because it looked like a data problem rather than a code one: Each V4_8 element is 4 bytes and holds four indices, so an array of N entries is count*4 bytes, not count. An earlier analysis compared the unpack's element count against the position counts and concluded that 15,000 patches could not hold enough parents. That was the wrong unit; the data was fine. unk_06 and unk_0a suppress an empty tier. When the extra vertex-info count is zero there is no extra array and its address is simply the next tier's, so guarding those branches on the count lets the address fall through to the array that exists. That one change took resolved LOD-0 entries from 28,739 to 341,306. Result: of 886,841 vertex-info entries across all 27 levels, 516,492 are common and have no link by design, and all 370,349 LOD entries resolve -- 29,043 LOD-01 and 341,306 LOD-0 -- with zero failures. Each resolves to a real first parent, a LOD-01 parent that is always a common entry, and three positions inside the patch. A common entry never claims a parent. Morphing can now be completed: a patch knows which LOD to draw, how far to blend each vertex toward its parents, and where those parents are. |
||
|
ReaperOfVeriod
|
2a5307a157 |
Add tfrag LOD selection, morph weights and parent linkage
The block header's float at +0x08 gives L and the switch distances are [D0, D1, D2] = [6L, 4L, 2L] world units -- 192/128/64 on every level measured. The distance test uses the patch's bounding sphere truncated to integers against trunc(D * 1024), not the sphere's centre, so a patch straddling a threshold takes the coarser mode. Six modes result: LOD 2, LOD 1 collapse, LOD 1 morph, LOD 0 collapse, LOD 0 morph, LOD 0. A morph weight runs 0 to 1 across its tier's band. Past the far edge an entry is not blended but replaced by its first parent -- a collapse. The tested property is that distance never moves back to a finer mode, swept across the whole range, because that is what keeps terrain from popping as the camera moves. The four V4_8 parent arrays are classified by VU address and an unrecognised address is now an error, which is a real check: all 18,102 patches still parse. Every recorded parent resolves to real vertex info and real positions, and no common entry claims a parent. That is as far as it goes, and the limit is a finding rather than a rounding error. The addresses are not unique: on level 0 patch 1, unk_indices_2_lod_01_addr == parent_indices_lod_0_addr == 291, with unk_06 and unk_0a both zero, so nothing but unpacking order separates them. Across all 27 levels 57,782 of 374,349 LOD entries resolve, and 316,548 unresolved LOD-0 entries against 28,739 resolved is far too lopsided to be genuine -- either the arrays are misassigned where addresses collide, or RAC2's positions_lod_0_count means something other than RAC1's. Only 3,274 of 18,102 patches carry enough V4_8 bytes to cover positions_lod_01_count + positions_lod_0_count + extras. The vertex-info tiers themselves are confirmed: the addresses at +9 and +11 match the observed V4_16 unpacks and the three tier counts sum to vert_count on every patch, so the header layout is right and it is specifically the parent arrays that are open. Ruled out so far: address-only classification (collides) and one-parent-per-position (fails on 15,000 patches). Not yet tried: ordering by VU address instead of by declaration, and using unk_06/unk_0a to suppress an empty tier before falling through. Written up in plan/level-assets.md. |
||
|
ReaperOfVeriod
|
48d9506cf1 |
Decode tfrag texture bindings, vertex colours and light records
Adds level_core.rs (the uncompressed core index header and texture table) and extends tfrag.rs with the data a draw call needs beyond geometry. An ad-gif is five A+D quadwords holding packed fields rather than GS registers; the level load rewrites them in place before drawing. On disc TEX0_1.data_lo indexes the level's texture table, TEX1_1.data_lo is the LOD bias K and data_hi the minification filter, and CLAMP_1 holds both wrap modes. Three things are easy to get wrong here: * K is a signed 12-bit value in 1/16 units, sign-extended by shifting the field up 4 and back down. Retail values are -137..-89 mip-scaled; reading it unsigned gives 1911 instead of -137. * TEX1_1.data_hi is MMIN, and 4 decodes as LinearMipmapNearest, not LinearMipmapLinear as the raw bit layout suggests. * RGBA and the light/normal records are not in the VIF lists at all. They sit at fixed offsets in the patch data block: rgba_size*4 colours at rgba_ofs, vert_count light records at light_ofs+0x10. The tfrag origin lives there too -- if no STROW row supplied one, the quadword at light_ofs is it. The texture table checks out on its own terms: 93 entries at index offset 0x2900 on level 0, and 0x2900 + 93*16 lands exactly on the next range. Verification: an ad-gif index outside the level's table would mean the geometry and the textures were misread independently, so every one is range-checked against real entries. All 27 levels: 47,950 ad-gifs over 18,102 patches, all in range, referencing 1429 of 1595 level texture entries (90%). Each patch's light array is exactly vert_count records and its RGBA array exactly rgba_size*4. Still open: LOD selection and morphing, and the texel data itself. |
||
|
ReaperOfVeriod
|
9459f15329 |
Parse tfrag topology: vertex info, strips, indices and triangles
Turns tfrag positions into drawable geometry. Every unpack in a patch's VIF lists is now classified by format *and* destination VU address, using the VU header at the head of the common list. That table is what tells the strips from the indices from the parent arrays: they are all V4_8 and only the address distinguishes them. Strip indices address the vertex-info array, not the position array. Several vertex-info entries can share a position, so an index resolves through vertex_info[i].vertex / 2 to reach a position. Vertex-info also carries UVs and the LOD parent link. A strip run of n vertices is a GS triangle strip of n - 2 triangles with alternating winding. The vertex count is biased by -128 when negative, and the first record of a list is always biased even when positive -- real patches open with -116 or -124, never a small positive number. tri_count lives in the patch header and cannot be derived from the lists without walking them, so reproducing it is a strong check: all 27 levels, 18,102 patches, 809,879 triangles, every patch matching its header, every triangle index inside its LOD's vertex-info range. Four wrong turns got there, each of which failed quietly rather than loudly: reading the element size from the immediate instead of the command, 2-byte payload padding instead of 4, ignoring the inline payload of STROW/STCOL/STMASK/MPG/DIRECT, and banking strips by arrival order instead of by LOD. Every one produced parseable, plausible geometry. Only the header's own triangle count caught them. Still open: ad-gif texture bindings, per-vertex RGBA and light records, and the LOD switch and morph rules. |
||
|
ReaperOfVeriod
|
36641b4cf8 |
Parse tfrag terrain blocks and decode all vertex positions
Adds gc-formats::tfrag and a gated real-disc test that decodes every terrain patch on all 27 levels. Two rules decide whether this works at all, and both were wrong on the first attempt: The vector format is encoded in the VIF command byte, not the immediate. Bits 2-3 are vn (component count minus one) and bits 0-1 are vl, giving element_size = ((32 >> vl) * (vn + 1)) / 8. Terrain positions are vn=2, vl=1 (command 0x69) at 6 bytes. Reading the format from the immediate's low nibble -- the more commonly quoted layout -- yields 12 or 16 bytes and misaligns everything after it. Unpack payloads pad to 4 bytes, and several non-unpack commands carry inline data: STROW/STCOL 16, STMASK 4, MPG num*8, DIRECT/DIRECTHL imm*16. Ignoring those desynchronises the walk, and a desynchronised walk still finds code words that look like positions. Positions are also not all in one list. vert_count is the total across three tiers, the LOD-2 list precedes the common one in offset order, and the LOD-0-only list starts at shared_ofs + lod_1_size*16 rather than at an offset of its own. Scanning only the common list matches about a quarter of patches, each exactly -- which is what made it convincing. The invariant is that every patch yields exactly its own vert_count. It caught both errors, so tfrag_positions returns None on a mismatch rather than partial geometry. All 27 levels: 18,102 patches, 821,439 vertices, zero mismatches. Still open: strips, triangle indices and the RGBA vertex-info arrays. Positions alone are not drawable. |